EFP Fiber Optic for Datavideo Remote includes a Camera Optic Adaptor and a Optic Base Station. The system transports a 3G/HD-SDI signal from the Sony or Panasonic camera to the Base Station, Reverse video(SDI or CVBS),Datavideo Remote control data(Connect Datavideo MULTI-CAMERA CONTROL UNIT MCU-100 ), intercom (Camera end can be connected professional 4-pin or 5-pin XLR headset, OB end can be connected intercom main station),, tally(1 or 2 colors),reverse CVBS or Genlock. The system puts all of the signals needed for multi-camera 3G/HD-SDI production on a SM / MM tactical or SMPTE hybrid fiber cable, insuring robust, trouble-free connectivity on any studio or remote production.

Features

• Handle all Pathological patterns

• Automatic cable equalization to ensure signal integrity

• 3G/HD/SD-SDI input auto recognition, support 270Mbit/s - 2.97Gbit/s according to SMPTE 424M, SMPTE 292M and SMPTE 259M

• 10+Km on single mode fiber or 300m on multimode fiber transmission

• With amplifier for mic and phones

• Remote control with Datavideo MCU-100

• Tally/GPI  LED+/- output or dry Contact Closure optional

• V-mount or A-mount battery plate optional

Specifications:




Work Temp	-25°C to 55°C
Storage Temp	-40°C to 85°C
humidity	0 ~ 95% (non-condensing)
Camera Optic Adaptor
Input power	DC 11~19V
Power consumption	<8W
Net weight	1kg
Appearance size	188mm*116mm*45mm(without V-mount / A-mount)
Optic Base Station
Input power	AC90~240V
Power consumption	<20W
Net weight	3kg
Appearance size	19" 1U standard rack mount




Optical:




Wavelength	1310nm / 1550nm / CWDM
Output Power	-6~-1dBm
Rx sensitivity	<-18dBm
Transmission Distance	SM fiber 10+km , MM fiber 300m
Optical connector	Dul LC /FC/ST/SC/ Lemo / Neutrik (optional)




SDI input/output:




Signal format	SMPTE 424M, SMPTE 292M, SMPTE 259M
Data rate	270Mbit/s - 1.48Gbit/s - 3Gbit/s
Cable Equalization	Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s
SDI interface	BNC 75 Ohm




Intercom:




Camera Optic Adaptor
Interface	4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack
Microphone	Mic inputs with mute and pre-amps
Headphone	With amplifier and volume up or down
Optic Base Station
Interface	3pin XLR Female/Male: Party line audio for Clearcom or RTS Intercom main station DB9(Male): Line level audio input and output,




Tally:




Camera Optic Adaptor
Interface	4pin air head or 3pin mini XLR
Output	Dry Contact Closure or wet LED+/-
	On: short or LED on Off: open or LED off
Optic Base Station
Interface	DB9(Male)
Input	Dry Contact Closure or TTL
	On: short to GND or TTL low  Off: open or TTL high




Remote:




Camera Optic Adaptor
Interface	RJ45 Datavideo remote interface
Data	RS422 /RS232/RS485
Optic Base Station
Interface	RJ45 Datavideo remote interface
Data	RS422 /RS232/RS485




Panel diagram: