Description

EFP/ENG/ESP Optical Fiber includes a Camera Optic Adaptor and a Optic Base Station. The system transports a 3G/HD-SDI signal from the camera to the Base Station and a return video (3G/HD-SDI or CVBS), Remote control data, genlock, intercom, tally, audio and 10/100M Ethernet are also provided. The system puts all of the signals needed for multi-camera 3G/HD-SDI production onto a SM / MM tactical or SMPTE hybrid fiber cable, insuring robust, trouble-free connectivity on any studio or remote production.

Features

• Handle all Pathological patterns

• Automatic cable equalization to ensure signal integrity

• 3G/HD/SD-SDI input auto recognition, support 270Mbit/s - 2.97Gbit/s according to SMPTE 424M, SMPTE 292M and SMPTE 259M

• 10+Km on single mode fiber or 300m on multimode fiber transmission

• Mic inputs with mute and pre-amps ,with amplifier for phones

• RS422 /RS232/RS485 remote control

• Tally/GPI output LED+/LED- or dry Contact Closure optional

• V-mount or A-mount battery plate optional

Specifications:

General index




Work Temp	-25°C to 55°C
Storage Temp	-40°C to 85°C
humidity	0 ~ 95% (non-condensing)
Camera Optic Adaptor
Input power	DC 12~19V
Power consumption	10W
Net weight	1kg
Appearance size	160mm*100mm*44mm(without V-mount / A-mount)
Optic Base Station
Input power	AC90~240V
Power consumption	10W
Net weight	3kg
Appearance size	19" 1U standard rack mount




Optical:




Wavelength	1310nm / 1550nm / CWDM
Output Power	-6~-1dBm
Rx sensitivity	<-18dBm
Transmission Distance	SM fiber 10+km , MM fiber 300m
Optical connector	Dul LC /FC/ST/SC/MX/ Lemo / Neutrik (optional)




SDI input/output:




Signal format	SMPTE 424M, SMPTE 292M, SMPTE 259M
Data rate	270Mbit/s - 1.48Gbit/s - 3Gbit/s
Cable Equalization	Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s
SDI interface	BNC 75 Ohm




Intercom:




Camera Optic Adaptor
Interface	4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack
Microphone	Mic inputs with mute and pre-amps
Headphone	with volume up or down
Optic Base Station
Interface	Input:3pin XLR Female , Output: 3pin XLR Male or 5pin XLR or 3.5mm headset jack
Audio	Balance or unbalance line level




Tally:




Camera Optic Adaptor
Interface	4pin air head or 3pin mini XLR
Output	Dry Contact Closure or wet +12V
	On: short or +12V Off: open or 0V
Optic Base Station
Interface	DB9(Male)
Input	Dry Contact Closure or wet
	On: short to GND or TTL low  Off: open or TTL high




Remote:




Camera Optic Adaptor
Interface	8pin air head or 8pin sony's remote interface
Data	RS422 /RS232/RS485
Optic Base Station
Interface	DB9(Male) or 8pin sony's remote interface
Data	RS422 /RS232/RS485




Ethernet:




Work mode	Full duplex/half duplex
Data Rate	10/100Mbps(AUTO)
connection terminal	RJ45

4K SDI To Fiber Converter